Loading ...
Loading ...
Loading ...
Before YouCallForService...
Troubleshooting -tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Surface units will not
maintain a rolling boi!
or cooking is oot
fastenough
Possible Causes
hnproper cookware
being used.
What ToDo
• Use pans which are flat and match tile (liameter oI
tile surtace unit selected.
Surface units do A fuse in your home may be • Rei)lace the fllse or reset the circuit breaker:
notworkproperly blown or the circuit breaker
_pped.
Cooktop controls • Check to see tile correct control is set for tile suriace
improperly set. unit you are using.
Scratches (may appear
as cracks) on cooktop
glass surface
Incorrect demlhlg
methods being used.
Cookware with rough bottoms
being used or coarse partides
(salt or sand) were between
the cookwaace mad the surface
of the cooktop.
Cookware has been slid
across the cooktop surface.
• Scratches are not remowd)le. Tiny scratches will become
less visible in time as a result of cleaning.
• To avoid scratches, use tile recommended cleaning
l)I'oce(hu'es. Make StlI'e bottouls ()t cookware aI'e clean
betore tlse_ and use cookware with SUlOoth botton/s.
Areas of discoloration Food spillovers not cleaned • See tile Cleaning the glass cooktop section.
on the cooktop before next use.
Hot surface on a model • This is normal. Tile surtace may appear discolored
with a light-colored cooktop, when it is hot. This is temporar) and will disappear
as tile olass cools.
Plastic meltedto Hot cooktop came into • See tile Glasssurface - potential for permanent damage
contact with plastic placed section in tile Cleaning theglass cooktop section.
on the hot cooktop.
Pitting (or indentation) Hot sugar mixture spilled • Call a qualified technician for replacement.
of the €ooktop on the cooktop.
Frequent cycling hnproper cookware • Use only fiat cookware to minimize cvclin,
offandonof behag used.
surface units
Oven lightdoes Light bulb is loose or defective. • Tighten or replace the bulb.
network Switch operating • Call for serxice.
light is broken.
Oven willnot work Plug on rm_ge is not completely • Make sure electrical l)lug, is l_lugged,,into a lixe, properly
inserted in the electrical outlet, grounded outlet.
A fuse in your home may be • Rei)lace the fllse or reset the circuit breakex:
blown or the circuit
breaker tripped.
Oven controls improperly set. • See tile Using the oven section.
36
Loading ...
Loading ...
Loading ...