Loading ...
Loading ...
Loading ...
If .YouNeed Service or Assistance
PLEASE READ THE FOLLOWING
BEFORE CALLING YOUR
SERVICE CENTER.
l.The mixer may warm up during use.
Under heaW loads with extended
mixing time periods, yon may not be
able to comfortably touch the top of
the unit. This is normal.
2.The mixer may emit a pungent odor,
especially when new. This is common
with electric motors.
3.If the flat beater hits the bowl, stop the
mixer. See "Beater to Bowl
Clearance," page 12.
If your mixer should malfunction
or fall to operate, please check the
following:
- Is the mixer plugged in?
- Is the fllse in the circuit to the mixer
in working order? If you have a circuit
breaker box, be sure the circuit is
closed.
- If the problem is not due to one of the
above items, see "Howto Arrange for
Service" on page 5.
- DONOTreturn the mixer to the
retailer as they do not provide service.
KEEPACOPYOFTHESALES
RECEIPTSHOWINGTHEDATEOF
PURCHASE.PROOFOFPURCHASE
WILLASSUREYOUOFIN-
WARRANTYSERVICE.
Electrical Requirements
Volts: 120 A.C. only. Hertz: 60
The wattage rating for your mixer is
printed on the trim band or on the serial
plate.
ModelKSMC50 Only:
Watts 350
Volts 120
Amps 3.0
Horsepower 2/5
Hertz 60
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire or electrical shock.
Loading ...
Loading ...
Loading ...