Loading ...
Loading ...
Loading ...
Attachments and Accessories
(Attachments not NSF Approved for KSMC5OSWH)
GENERAL INFORMATION
KitchenAid _'attachments are designed to assure long life. The attachment power
shaft and hub socket are of a square design, to eliminate any possibility of slipping
during the transmission of power to the attachment. The hub and shaft housing are
tapered to assure a snug fit, even after prolonged use and wear. }(itchenAid k'
attachments require no extra power unit to operate them; the power unit is built in.
Attachment
Knob Attachment
Shaft:_
Hub Socket
Notch
.[-Not part of mixer.
Attachment Shaft
Housing
General Instructions
TO ATTACH
1.Turn mixer off and unplug.
2. Loosen attachment knob by turning it
counterclockwise.
3. Remove attachment hub cover.
4. Insert attachment shaft housing into
attachment hub, making certain that
attachment power shaft fits into
square attachment hub socket. It may
be necessaly to rotate attachment
back and forth. When attachment is
in proper position, the pin on the
attachment will fit into the notch on
the hub rim.
5. Tighten attachment knob by turning
clockwise until attachment is
completely secured to mixer.
6. Plug mixer in proper electrical
outlet.*
* See page 6.
TO REMOVE
1. Turn mixer off and unphlg.
2. Loosen attachment knob by turning it
cotmterclockwise. Rotate attachment
slightly back and forth while pulling
out.
3. Replace attachment hub cover.
4. Tighten attachment knob by turning
it clockwise.
17
Loading ...
Loading ...
Loading ...