Jenn-Air JJW9827DDP electric wall oven

User Manual - Page 30

For JJW9827DDP.

PDF File Manual, 96 pages, Download pdf file

Loading ...
Loading ...
Loading ...
NG
PROBLEM SOLUTION
Oven baking results are less , The pans being used may not be of the size or materiaHrecommended for best
than expected, resuHts.(See "Coeki#g Made Simple" booHoO.
, There may not be sufficient room around sides of the pans for proper air circuHation
in the oven.
, Check instructions for preheating, rack position and oven temperature.
Baking results differ from , Oven thermostat caHibration may differ between oHdand new ovens. Follow recipe
previous oven. and use the directions in this guide before calling for service since the caHibrationon
the previous oven may have drifted to a too high or too Howsetting. (See page 20 -
Temp Adjust.)
Fan is heard when oven is ° This is the cooling fan and is normal. The fan wiii continue to run after use
tamed on. until the oven cools. (See page 12.)
Cooling fan continues to , This is normal. The fan will automatically shut off when the oven has cooled.
operate after the oven has been
turned off.
Probe does not work. , Check to be sure probe plug is properly inserted into oven receptacle.
(select models) ° Probe may not be positioned in food properly.
° Probe temperature may have been improperly set.
° Food may have been too cold or frozen when the probe was inserted.
Fault Codes ° The oven may detect a fault during programming or during operation. If a fault is
detected, the message "Fault detected - press power to clear" or "Fault detected -
press enter to try again" may appear. Follow directions in the display. If the fault
reappears or does not clear, call an authorized servicer or the toll-free number in the
display.
° If the same operation is attempted before having the wall oven repaired, the message
"Feature not available" will appear. The feature will remain inoperable until service
is obtained.
° If the oven is heavily soiled, excessive fiareups may result in a fault code during
cleaning. Pressthe CANCEL pad and allow the oven to cool completely, wipe out
excess soil, then reset the clean cycle. If the fault code reappears, contact an
authorized servicer.
There are no beeps and ° Oven may be in Sabbath Mode. (See page 21.]
no display.
Noises may be heard. , The oven makes several low level noises. You may hear the oven cooling fan going
on and off. You may also hear the oven relays as they go on and off. These are all
normal.
, As the oven heats and cools, you may hear sounds of metal parts expanding and
contracting. This is normal and will not damage your appliance.
29
Loading ...
Loading ...
Loading ...