Loading ...
Loading ...
Loading ...
14
Maintenance
REPLACING FILTERS
When lters need replacing, exchange with similar. Also
replace lters that are damaged with punctures, bends,
or broken frames.
- Turn off the range hood and disconnect the
power.
- Replace with an equivalent lter, then reconnect
the power.
REPLACING LIGHT BULBS
When light bulbs burn out, replace them with a 5W
GU10 base light bulb.
- Turn off the range hood, disconnect it from its
power source, and ensure that the lights are cool.
- Turn the bulb (1) in the direction indicated and
pull it out to remove it.
- Push in the new bulb (2) in the direction indicated
until it locks into the socket. Do not release
the bulb until you are sure the bulb has been
securely installed. Then reconnect the power.
- If new bulbs do not operate, ensure that they are
inserted correctly.
DANGER: Turn off the power circuit breaker or the
power switch on the junction box before performing
maintenance. Touching circuitry inside the range
hood while it is energized will result in death or
serious injury.
WARNING: Failure to replace worn out or
damaged lters will increase the risk of re.
WARNING: Light bulbs can become hot when
turned on. Do not touch bulbs until they are switched
off and cooled. Touching hot bulbs could cause
serious burns.
1
2
Loading ...
Loading ...
Loading ...