Loading ...
Loading ...
Loading ...
W415-1676 / E / 05.17.21
EN
36
selecting wood
Remove all sources of gasoline or other fl ammable vapours and liquids in the vicinity of this or other
appliances prior to lighting.
Draft is the force which moves air from the appliance up through the chimney. The amount of draft in your chimney
depends on the length of the chimney, local geography, nearby obstructions and other forces.
Inadequate draft may cause back-puffi ng into the room and may cause plugging of the chimney. Too much draft
may cause an excessive temperature in the appliance, glowing red appliance parts or an uncontrollable burn
which can all lead to a chimney fi re or a permanent damage to the appliance.
8.2 starting a fi re
8.3 fi re extinguishers / smoke dectectors & carbon monoxide detectors
• Always operate this appliance with either the glass door or spark screen closed. After re-fueling, always close
either the glass door or the spark screen. Always wear gloves to prevent injury.
!
WARNING
All homes with a solid fuel burning appliance should have at least one fi re extinguisher in a central location,
known to all, at least one smoke detector and carbon monoxide (CO) detector in the room containing the
appliance. If the smoke detector sounds an alarm, correct the cause but do not deactive or relocate the smoke
detector. If the carbon monoxide detector sounds an alarm, immediately vent the area, evacuate and call your
local fi re department.
Loading ...
Loading ...
Loading ...