Loading ...
Loading ...
Loading ...
LOGO
1/2”
1/2”
Remove the backing from the logo and position onto the control door as shown.
B. Place the hole in the underside of log #2
onto the locating screw, on the left side of the
burner. The fi bre burner is formed to cradle the
centre of the log.
C. Place the hole in the underside of log #3 onto
the locating screw, on the right side of the
burner. The bottom branch of log #3 sits in
front of, and against, the right end of log #2.
D. Reinstall the glass door & front.
4.5 logo placement
W415-2347 / C / 09.21.20
EN
26
fi nishing
Loading ...
Loading ...
Loading ...