Loading ...
Loading ...
Loading ...
A. Remove safety barrier.
B. Lift the top cast piece off of the appliance.
C. Pull handle and rotate 90°.
D. Slide the door straight up to remove.
Follow the above steps in reverse in order to reinstall the door.
Ensure that the bottom of the door engages the door retainer
before closing the latches.
LATCHES
DOOR
4.3 glass door installation and removal
4.4 log placement
LOG LOCATING SCREWS
BRACKET
It is not necessary to remove the cast front, however, this will make for a more simple log installation.
In order to assemble the log set, the glass door must be removed, see “cast front / glass door installation and
removal” section.
A. Place the rear log, as shown, onto the rear log
support brackets. Ensure the cutout on the left
underside of the log, fi ts over the pilotassem-
bly. Bend the bracket on the left side to help
retain the rear log.
• Do not substitute materials.
!
WARNING
• Logs must be placed in the exact location in appliance. Do not change from the proper log positions, as
appliance may not function properly.
• The logs are fragile and should be handled with care.
!
WARNING
EN
W415-2347 / C / 09.21.20
25
fi nishing
Loading ...
Loading ...
Loading ...