Loading ...
Loading ...
Loading ...
Installation and User Instructions R02889-3 04/14
Page 6
Important Information
Precaution: “This appliance can be used by children
aged from 8 years and above and persons with reduced
physical sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the appliance
in a safe way and understanding the hazards involved.
Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without
supervision.”
Note: Between the inlet group and
the cold water inlet on the
cylinder NO isolating device may
be fitted, as by doing so important
safety devices could be isolated!
It is important to check the pre-
charge pressure of the expansion
vessel membrane before filling
the cylinder. The pre-charge
should be greater than or equal
to 3 bar.
It is important that the tundish is
positioned away from any
electrical components.
Note: Means for electrical
disconnection must be
incorporated in the fixed wiring in
accordance with the wiring rules.
Before removing the cover from
the immersion heater isolate
appliance using isolating switch!
Danger of electrical shock! Only
use suitable electrically insulated
equipment when working inside
immersion housing.
Note: The cylinder must be filled
with water before switching on
the immersion heater. Failure to
do so will damage the element
and void any guarantee on the
product.
The maintenance of this
appliance must be carried out
by a suitably qualified person
only. It is recommended to
maintain the unit on an
annual basis. Isolate all
electrical supplies from the
unit before commencing
work. Danger of electrical
shock!
CLEANING INSTRUCTIONS:
Clean outer cladding of
cylinder with a soft cloth
dampened with warm water
only. Do not use abrasive or
aggressive cleaning
materials, such as alcohol or
petroleum based solvents, as
this may damage the surface
of the product.
If an electronic copy of this manual
should be required, please contact the
manufacturer at the address at the
back of this manual.
Loading ...
Loading ...
Loading ...