Loading ...
Loading ...
Loading ...
WaterBoss Softener Two-Button Owner’s Manual 8/1/2018 16
Advanced Customer Settings, Cont.
Step 3
Set Time of Regeneration
A. Both the
and the
R indicator will blink and the display reads 02 for the default Regeneration
Time of 2:00 a.m.
B. Press the R
button to cycle through values 00 to 23 representing the desired Time of Regeneration
on a 24-hour clock.
Note: Set time to the nearest hour.
C. When the desired setting is displayed, press the P button.
Step 4
Set Demand or Delayed Mode
A. The
R indicator will blink and the display reads - -, indicating the default setting of Demand mode.
B. Press the R
button to cycle between - - (Demand mode) or (Delayed mode). If the
Delayed mode is active, the
R indicator is displayed during Normal Operation.
− Delayed mode allows regeneration at a specific time (for example, at 2 a.m. when less water is
typically being used).
− Demand mode triggers a regeneration as soon as softening capacity is exhausted. This is the
factory default.
C. When the desired setting is displayed, press the P button.
Step 5
Set 96-Hour Mode
A. The 96H indicator will blink and the display reads , indicating the default status of on.
B. Press the R
button to cycle between - - and . If the 96-Hour mode is on, the 96H indicator is
displayed during Normal Operation. The 96-Hour mode prevents the appliance from going longer
than 4 days without a regeneration.
Note: If there is iron in your water, select 96H. On most municipal water supplies or if no water will be
used for an extended period of time (for example, going on vacation), turn this option off.
C. When the desired setting is displayed, press the P button and move to the next function.
Step 6
Set powerClean™ Mode
A. The PC indicator will blink and the display reads - -, indicating the default status of off.
B. Press the R
button to cycle between - - and . This is the only way to turn the powerClean™
mode on or off. Turning on the powerClean™ mode, turns off the 96-Hour mode.
C. When the desired setting is displayed, press the P button and return to Normal Operation.
Advanced programming is now complete.
Loading ...
Loading ...
Loading ...