Loading ...
Loading ...
Loading ...
WaterBoss Softener Two-Button Owner’s Manual 8/1/2018 12
Two-Button Controller
This appliance features a two-button controller with an LCD display. The controller can be used to view the appliance’s
status, perform regenerations, and change settings. (See Figure 6) The controller must be set up correctly for the
appliance to perform properly. Note: Ensure that the bottom of the controller is firmly locked onto the four tabs on the top
of the drive end cap assembly. (See Figure 7)
Figure 6: Two-Button Controller
Figure 7: Controller Tab Lock Detail
Controller Part
Function
LCD Display
Shows the status of the controller
Soft Water
Remaining
( x 100)
Shows the gallons (or liters) of soft water remaining until the next automatic regeneration. Typically, each
person in the household uses about 75 gallons (284 L) per day. Water remaining is in gallons (or liters) in
hundreds.
For example 5 = 500 gallons (19 = 1900 liters).
Recharge/
Regeneration
Status
Shows regeneration cycle numbers during regeneration. The display will blink the cycle number. The
blinking regeneration numbers are:
First cycle
(01) First Backwash
Second and Third cycles
(02) Brine/Slow Rinse
Fourth cycle
(03) Second Backwash
Fifth cycle
(04) Brine Refill
Sixth cycle
(HO) Service (Briefly)
When regeneration is complete, the display shows the number of gallons (or liters) in hundreds of soft
water remaining. (See above) Regeneration is typically completed in about 30 minutes.
waterMizer
®
Technology LED
Indicates that water is flowing through the appliance; the waterMizer
®
light flashes green when water is
being used. This is useful for checking for proper plumbing and leaks.
Metric
Indicator Bar
Indicator
Water
Remaining
waterMizer
®
Light
Loading ...
Loading ...
Loading ...