Loading ...
Loading ...
Loading ...
WaterBoss Softener Two-Button Owner’s Manual 8/1/2018 11
Bypass Valve
Your appliance is equipped with a bypass valve. The bypass valve can isolate the appliance should the appliance
malfunction or leak. It can also permit the use of untreated water for watering plants, shrubs, or lawns.
The bypass is located on the main control valve. (See Figure 5) To engage the bypass, turn the knob to the Bypass
position. The appliance will be bypassed and all water to the home is raw, untreated water. To prevent untreated water
from entering the home, water should not be used inside the home when the appliance is in Bypass mode. Ensure that
the appliance is returned to Normal Operation when the appliance is repaired or the use of untreated water is complete by
turning the knob to Service.
To blend hardness back into the water using the bypass, turn the knob slightly from the Service position toward the
Bypass position.
Figure 5: Valve View of Softener
Two-Button
Controller
Power Cord
Motor Wire
Service Position
Bypass Position
Turbine Sensor Wire
Brine Line
Loading ...
Loading ...
Loading ...