Loading ...
Loading ...
Loading ...
Tail lamps, bulb replacement
Overview
1 Turn signal
2 Outer brake lights
3 Inside brake light
4 Reversing light
5 Rear light
Bulb replacement
General information
Follow the safety information, refer to
page 243.
Reversing light: 21-watt bulb, W21W.
The turn signals, brake lights, and rear lights
feature LED technology. In the case of a mal‐
function, contact a dealer’s service center or
another qualified service center or repair shop.
Removing the tail lamp
1.
Open tailgate.
2. Open the two covers on the tail lamp.
3. With the handle of the screwdriver from the
onboard vehicle tool kit, loosen and re‐
move the nuts on the two fasteners. Make
sure that the nuts do not drop into the
bumper area. In addition to the two outer
fasteners, there is another inner fastener.
4. Hold the grip rail in one hand, arrow 1, and
brace against the outside with your other
hand, arrow 2. Carefully pry out the tail
lamp, arrow 3, until the rubber mount re‐
leases from the inner fastener.
5. Remove the plug from the bulb holder.
Replacing the bulbs
1.
Turn the cover in the direction indicated on
the housing and remove it.
Seite 244
Mobility Replacing components
244
Online Edition for Part no. 01402981298 - VI/17
Loading ...
Loading ...
Loading ...