Loading ...
Loading ...
Loading ...
If a tire inflation pressure of 2 bar is not
reached:
1. Switch off the compressor.
2. Pull the connector out of the power socket
inside the vehicle.
3. Unscrew the filling hose from the tire valve.
4. Drive 33 ft/10 m forward and back to dis‐
tribute the sealant in the tire.
5. Inflate the tire again using the compressor.
If a tire inflation pressure of 2 bar cannot be
reached, contact your dealer’s service cen‐
ter or another qualified service center or
repair shop.
Stowing the Mobility System
1.
Remove the connection hose of the seal‐
ant container from the tire valve.
2. Pull the compressor connector out of the
socket inside the vehicle.
3. Remove the connection hose from the
sealant container.
4. Wrap and store the sealant container and
the connection hose in suitable material to
avoid dirtying the cargo area.
5. Stow the Mobility System back in the
cargo area.
Distributing the sealant
Immediately drive approx. 5 miles/10 km to en‐
sure that the sealant is evenly distributed in the
tire.
Do not exceed the permissible maximum
speed of 50 mph/80 km/h.
If possible, do not drive at speeds less than
12 mph/20 km/h.
Correcting the tire inflation pressure
1. Stop at a suitable location.
2. Screw the connection hose onto the tire
valve stem.
3. Attach the connection hose directly to the
compressor.
4. Insert the connector into the power socket
inside the vehicle.
5. Correct the tire inflation pressure to
2.5 bar.
▷ Increase tire inflation pressure: with the
ignition switched on or the engine run‐
ning, switch on the compressor.
▷ Reduce tire inflation pressure: press
the button on the compressor.
Seite 226
Mobility Wheels and tires
226
Online Edition for Part no. 01402981298 - VI/17
Loading ...
Loading ...
Loading ...