Loading ...
Loading ...
Loading ...
WARNING
Improperly executed work can lead to
failure, malfunction or unintentional triggering
of the system. In the case of a malfunction, the
system might not trigger as intended even if
there is an accident severe enough to warrant
it. There is a risk of injuries or danger to life.
Have the system checked, repaired, disman‐
tled and scrapped by a dealer’s service center
or another qualified service center or repair
shop.◀
WARNING
After triggering or damage, system func‐
tionality is limited or not available anymore.
There is a risk of injuries or danger to life.
Have the system checked and replaced by a
dealer’s service center or another qualified
service center or repair shop in the event of
triggering of or damage to the system.◀
WARNING
With an extended rollover protection sys‐
tem, the area of movement of the convertible
top is limited. There is risk of injuries or risk of
property damage. When the rollover protection
system is extended, do not move the
convertible top.◀
Overview
Covers of the rollover protection system
Triggered rollover protection system
If the rollover protection system was not
placed under any stress after an automatic
triggering, it can be pushed back by hand, e.g.,
to close the convertible top. The protective
function of the system is then restored.
1. Pull the release lever in the safety frame up
and hold it, arrow 1.
2. Push the safety frame down, arrow 2.
3. Release the release lever only if the safety
frame was pushed back almost completely.
4. Push the safety frame down until it notice‐
ably engages. To do this, the safety frame
must be pressed far into its holder; high
levels of force are required.
WARNING
If the safety frame is not engaged
correctly, it can extend jerkily. There is risk
of injuries. When pressing down the trig‐
gered rollover protection system, do not
bend over the safety frame.◀
Slowly reduce pressure on the safety
frame in order to test whether it is latched.
5.
Proceed likewise with the second safety
frame.
Malfunction
A Check Control message is displayed
when there is a malfunction.
Seite 125
Safety Controls
125
Online Edition for Part no. 01402981298 - VI/17
Loading ...
Loading ...
Loading ...