Loading ...
Loading ...
Loading ...
32
HOW TO USE
Figure 1 Figure 2
Rack
B
A
E
D
C
B
A
Preheating and Pan Placement
y
To preheat, set the oven at the required recipe tempera-
ture. Wait until the oven reaches its set temperature
before placing the food in the oven. Preheating is neces-
sary for satisfactory results when baking cakes, cookies,
pastry and breads.
y
For best baking results, pans should be centered on the
racks. If baking with more than one pan, place the pans
so that each one has at least 1” to 1
1
/
2
” of air space
around them.
If cooking on multiple racks in the lower oven, place
the oven racks in position C(rack) and E(rack). Place the
cookware as shown in Fig.1.
If cooking on a single rack in the upper oven, place the
oven rack in position A and in the lower oven, please
the oven rack in position C. Place the cookware as show
in the Fig.2.
In the upper oven it is recommended to bake with the
standard rack in the position A.
CONVECTION ROAST FOR THE
LOWER OVEN
(LDG3036ST / LDG3036BD /
LDG3037ST)
CONVECTION ROAST feature is designed to give optimum
roasting performance. CONVECTION ROAST feature
combines cooking with the convection fan to roast meats
and poultry. The heated air circulates around the food from all
sides, sealing in juices and flavors. Foods are crispy brown on
the outside while staying moist on the inside.
1
To set the lower oven to CONVECTION ROAST (example
to 375°F).
1) Press the key. Display will show .
2) Set the oven temperature
(Touch
3
,
7
,
5
).
3) Press the
q
key. Display will show
CONV
,
ROAST
and
the changing temperature starting at 100°F. As the oven
preheats, the display will show increasing temperatures
by 5 degree increments.
4) Once the oven reaches the desired temperature, a tone
will sound and the oven light will flash on and off. The
display will show the auto converted oven temperature
,
CONV
,
ROAST
and .
5) Place food in oven.
NOTE
When cooking using a convection cycle the oven
temperature is automatically reduced by 25°F, and then the
display will show the changed temperature. This feature
is called”AUTO CONVERSION”. Your range comes with
this feature “ENABLED”. To DISABLE the auto conversion
feature, see “How to set convection auto conversion
function” in Operating Instructions section.
NOTE
y
Press the key to cancel CONVECTION ROAST
function at any time.
y
Display of the CONVECTION ROAST mode (Example)
Lower oven only
Upper & Lower oven at the same time
Loading ...
Loading ...
Loading ...