Loading ...
Loading ...
Loading ...
-18
Using the Remote Control
Using the Remote Control with a Signal Cable
When the signals from the remote control cannot be reached due to the range or positioning of the projec-
tor, you can connect the remote control to the projector with a ø3.5 mm minijack cable (commercially avail-
able or available as Sharp service part QCNWGA038WJPZ).
Switching the Remote Control Mode
The remote control has two functions. One is projector control and the other is wireless computer mouse.
Slide the ADJ./MOUSE switch on the remote control to other side compatible to the desired usage.
Info
• When using the remote control as the wireless computer mouse, connect the supplied remote mouse
receiver to the computer. (See page 19.)
Side view
Remote control
To WIRED R/C JACK
To WIRED REMOTE terminal
ø3.5 mm minijack cable (commercially available or
available as Sharp service part QCNWGA038WJPZ)
ADJ.
MOUSE
ADJ.
MOUSE
Projector control Wireless computer mouse
Loading ...
Loading ...
Loading ...