Loading ...
Loading ...
Loading ...
OPERATION
OvenControl, Clock and Timer
Your new control has a series of tones
that wilt sound at different times
These tones may sound while you set
the control for an oven function, or at
the end of the oven function It will also
alert you that there may be a problem
with the functions Below are the types
of tones and a brief description of
each.
TONES WHILE SETTING THE
CONTROL- When you press a touch
pad you will hear a beep This beep
will let you know you have placed
enough pressure on the pad to activate
it. (The arrow pads do not beep )
END OF TIMED CYCLE TONE - At the
end of atimed cooking function, you
will hear 3 short beeps followed by I
beep every 6 seconds This 6 second
beep wil! continue to sound until the
CLEAR!OFF pad is pressed or you
may select the special feature to cancel
this 6 second beep from sounding at
the end of future cycles
TO CANCEL THE 6 SECOND BEEP
1. Press and hold the BAKE and
BROIL pads, at the same time for
3 seconds, until the display shows
"SF"
2. Press the KITCHEN TIMER pad
The display wit! show "CON
DEEP" (continuous beep),
3. Press the KITCHEN TIMER pad
again. The display will show
"DEEP" (beep canceled),
4. Press the START pad to cancel
the 6second beep and leave the
special feature mode
Ifyou would like to relurn the 6 second
beep, repeat steps above until the
display shows your choice and press
the START pad
ATTENTION TONE - This tone will
sound if you make an error or an
oversight is made while setting an
oven function,
Examples would be:
a. Setting a clean cycle and the oven
door is not properly closed
b. Setting a function and not pressing
theSTART pad
c. Pressing an additional function pad
without first setting a temperature
or time
Any of these can be quickly identified
by watching the display
PREHEAT TONE - When you
select a cooking mode, set an oven
temperature and press the START
pad, the oven starts to heat=When the
temperature inside the ovenreaches
the temperatureyou have set, a tonewill
sound to letyou know the oven is ready
for baking
Ifyou set an oven function and the
control beeps while the display is
flashing "F" and a number or letter
such as "F-4" or "Ft," theremay be
a problem with the control or oven.
Simply press the CLEAR/OFF pad
and wait about an hour. Try setting
the function again, Ifthe code repeats.
write down the flashing code and cal!
for service. Tell the technician what
code was flashing
9
20P307-2 ENv01 2./14J03. 3:34 PM
Loading ...
Loading ...
Loading ...