Loading ...
Loading ...
Loading ...
OPERATION
Clock, Timerand
ControlLockout
The clock must be set for the correct
time of day before a delayed oven
function can work properly The time
of day cannot be changed during a
timed oven function., but can be
changed during a bake or broil
function
HOW TO SET THE CLOCK
®®
t. Press the CLOCK pad
2_ Press the HOUR/MIN UP and/or
DOWN arrow pads to set the time
3o Press the START pad
RECALL THE CLOCK
While using your oven for cooking,
press the CLOCK pad if you wish to
check the time of day The current
time of day will show in the display
POWER FAILURE
Ifyou have experienced a power
failure, the time wilt flash in the display
and will be incorrect Reset your clock
Any oven cooking function that was in
process will need to be reset
The Kitchen Timer is used to time
cooking processes or other
household activities It does not
control the oven tt can be set lot up
to 9 hours and 59 minutes Itwill
count down in minutes until the LAST
60 SECONDS is reached, then the
control will beep once. When the
countdown reaches ZERO, the
8
control will beep 3 times followed by
one beep every 6 seconds until the
KITCHEN TIMER pad is pressed The
6 second beep can be removed for
future cycles if desired For directions
on removing this continuous beep,
see Tones on the following page
HOW TO SET THE TIMER
QQ
1_ Press the KITCHEN TIMER pad,
2, Press the HOUPJMIN UP and/or
DOWN arrow pads to set time
3, Press the START pad
4_ When the countdown has reached
zero, press the KITCHEN TIMER
pad to turn off the beep
To cancel the timer during the
countdown, press the KITCHEN
TIMER pad TWICE
Your control will allow yeu to lock the
touchpads so they cannot be activated
when pressed If you're worried about
leaving the oven unsupervised, activate
this feature
t. Press and hold, at the same time,
the HOUPJMIN DOWN arrow pads
for3 seconds, until the display
shows "LOC ON"
2. To unlock the control, press
and hold, at the same time, the
HOUR/MIN DOWN arrow pads
for3 seconds, until the display
shows "LOC OFF"
This feature can only be set when the
oven is not in use.
When this feature ison no touch
pads will work The display will show
"LOC ON" if a touch pad is pressed
The adjustment will be retained in
memory after a power failure,
20P307-2 EN',t01 2/14103 3:34 PM
Loading ...
Loading ...
Loading ...