Loading ...
Loading ...
Loading ...
CAREANDCLEANING
Self-Cleaning Cycle
The Clean Cycle, including cooldown
time offers preset options of 3.4 or 5
hours, but you may change this to any
time between 3 and 5 hours
1o For 3 hours: Press theSELECT CLEAN pad 3
hours and "Lo" wil! show
in the display This setting
is recommended for small
contained spills Go to
step 3 and press the
START pad.
For 4 hours: Press
the SELECT CLEAN pad
two times. 4 hours and
"Std" will show in the
display This setting is
recommended for a
normally soiled oven
Go to step 3 and press
the START pad
For 5 hours: Press the
SELECT CLEAN pad
three times 5 hours and
"Hi" willshow in the
display This setting is
recommended for heavily
soiled ovens Go to step 3
and press the START pad.
If you want to change the
length of clean time, press
the HOUR!MIN UP and/or
DOWN arrow pad
<_3_ Press the START pad.
Simply pressthe CLEAR/OFFpad You
will need towait for the oven temperature
todrop below the lock temperature
(approx 1hour) before attempting to
open the door
After the cycle, you may notice some
white ash in the oven Just wipe it up
with a damp cloth or sponge
If white spots remain, scrub them
with a soap-filled steel wool pad Be
sure to rinse thoroughly These are
usually deposits of salt that cannot
be removed during the cycle.
If your oven is equipped with
porcelain oven racks, it will be
necessary to grease the edges with a
light coating of vegetable oil after the
clean cycle This will help maintain
the ease of sliding the racks in and
out of the oven
If for any reason you are not
satisfied with the cleaning results,
just repeat the cycle.
1, PresstheSELECTCLEAN pad and
choose the clean level
of either Lo (3hours),
Std(4 hours)or Hi(5
hours).Ifone of these
isyourchoice, go to
step 3and set the
delay starttime
(_ (_ 2. Ifyouwant to change
the length of clean_lt3
time,press theHOUR/
.... MIN UP and/orDOWN
arrow pads,
3. Press theDELAYSTART TIME pad
C) (_ 4. PresstheHOUPJMIN
UP and/or DOWN
arrow pads toset the
......._r,'__ timeyou preferthe
clean cycle tostart,
Pressthe START pad.
22
20P307-2 ENv01 2..t14_'033:35 PM
Loading ...
Loading ...
Loading ...