Loading ...
Loading ...
Loading ...
5
WARNING
DANGER
Risk of Most dwellings built before 1985 have supply wire rated for 140°F. Consult a
elec
trician before installation.
Wire connectors will not support the weight of a
suspending a by the house wires and
wire connectors will result in the
falling, with the possibility of personal injury and the danger
of electrical shock or
To reduce the risk of
or electric shock, do not use this fan with any solid state fan speed device or
variable speed control.
To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,
balancing or cleaning the fan.
Do not insert foreign objects in between rotating fan blades.
Do not install or use the fan if any part is damaged or missing.
To reduce the risk of
electrical shock or personal injury, mount to outlet box marked “ACCEPTABLE
FOR FAN SUPPORT OF 35 LBS OR LESS” and use mounting screws provided with the outlet box
and/or support directly from building structure. Most outlet boxes commonly used for the support
of luminaries are not acceptable for fan support and may need to be replaced. Consult a
electrician if in doubt.
Before servicing or cleaning the unit, switch power off at the service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag,
to the service panel.
Installing a
into an electrical system without a proper grounding means could allow metal parts
of the
to carry electrical currents. If any of the wires, wire connections or splices are
broken, cut or loose during the mounting or normal operation of the
under such condition,
anyone coming in contact with the
is subject to electrical shock, which could cause serious
injury or death.
Connection of the bare or green
ground wire to the black or white house wires may allow metal
parts of the
to carry electrical currents. Under this condition anyone coming in contact with the
will receive electrical shock, which could cause serious injury or death.
Be careful not to damage or cut the wire insulation (covering) during
installation. Do not permit
wires to have contact with any surface having a sharp edge. Doing so may damage or cut the wire
insulation, which could cause serious injury or death from electric shock.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 45 minutes
Tools Required for Assembly (not included): Philips Screwdriver, Step Ladder, Tape, Pliers and
Wire Cutters.
Lowes.com/harborbreeze
Loading ...
Loading ...
Loading ...