Loading ...
Loading ...
Loading ...
4
HARDWARE CONTENTS
AA BB
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
All electrical connections must comply with local codes, ordinances or the National Electric Code
(NEC). Contact your municipal building department to inquire about your local codes, permits and/or
inspections.
Turn off electricity at the main fuse box (or circuit breaker box) before beginning installation by
removing the fuse or by switching off the circuit breaker.
Do not connect this
to an electrical system that does not provide a means for equipment
grounding. Never use a
in a two-wire system that is not grounded.
If you are not sure your lighting system has a grounding means, do not attempt to install this
Contact a
licensed electrician for information regarding proper grounding methods as
required by the local electrical code in your area.
Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the
and at least 30 in. from the ends of the blades to any obstruction.
Secure the outlet box directly to the building structure. The outlet box and its support must be able to
support the moving weight of the fan (at least 35 Ibs.).
If a dimmer control switch is used with this
obtain professional advice to determine the correct
type and electrical rating required.
The lighting
must be positioned so there is at least 1.64 ft. between the bulb and any illuminated
surface.
For supply connections, if the conductor of a fan is
as a grounded conductor, then it should
be connected to a grounded conductor power supply. If the conductor of a fan is
as an
ungrounded conductor, then it should be connected to an ungrounded conductor power supply. If the
conductor of a fan is
for equipment grounding, then it should be connected to an equipment-
grounding conductor.
All
must be mounted to a 4 in. x 4 in. x 2-1/8 in. deep metal outlet box that is supported by
the building structure. Do not attempt to support the
by ceiling board alone. The ceiling board
alone does not have the strength to support the weight of the
The could fall and cause
personal injury.
Do not use bulbs having a wattage greater than the maximum value stated on the
and in this
manual. Using a higher wattage bulb than
will increase temperature and increase
risk of
CAUTION
Lowes.com/harborbreeze
Blade Screw
Qty. 15 + 1 Extra
Motor Screw
Qty. 10 (5 preassembled) + 1 Extra
Loading ...
Loading ...
Loading ...