Loading ...
Loading ...
Loading ...
Fig. 86 Removing the holder/removing the adapter
Read and observe on page 80 first.
Installing
›
Attach the opened adapter to the guide rods of the headrest » Fig. 85.
›
Clip in the adapter in the direction of arrow
1
» .
›
Clip the holder into the adapter in the direction of arrow
2
.
Removing
›
Pull on the locking strap
A
in the direction of arrow
3
» Fig. 86.
›
Remove the holder from the bracket in the direction of arrow
4
.
›
Press the adapter and remove it from the guide rods of the head rest in the
direction of arrow
5
.
WARNING
Clip in the adapter carefully - there is a risk of injuring your finger.
Handling the holder
Fig. 87 Tilting and rotating the holder
Fig. 88
Adjusting the holder size
Read and observe on page 80 first.
Tilting and rotating the holder
The holder may be tilted 30° in the direction of arrow
1
and rotated through
360° in the direction of arrow
2
» Fig. 87.
Adjusting the holder size
›
Pull out the securing tab
A
in the direction of arrow
3
and move part
B
in
direction of arrow
4
to the desired position » Fig. 88.
Luggage compartment and transport of cargo
Introduction
This chapter contains information on the following subjects:
Fastening elements
82
Fixing nets 83
Multifunction pocket 83
Hooks 83
Luggage compartment cover 84
“Parking position” of the boot cover 84
Storage compartment in the boot 85
Storage net bag 85
Cargo elements 85
Floor covering on both sides 86
Class N1 vehicles 86
81
Transporting and practical equipment
Loading ...
Loading ...
Loading ...