Loading ...
Loading ...
Loading ...
Save tyre pressure values by pressing a button
Fig. 136
Key for storing the pressure val-
ues
Read and observe on page 120 first.
›
Inflate all the tyres to the specified pressure.
›
Switch on the ignition.
›
Press the symbol key
» Fig. 136 and hold it down.
The warning light
in the instrument cluster illuminates.
An acoustic signal and the control indicator provide information about the
storage of the tyre pressure values.
›
Release the symbol key
.
Hitch and trailer
Hitch
Introduction
This chapter contains information on the following subjects:
Description 122
Adjusting the ready position 122
A correctly set ready position 123
Assembling the tow bar – Step 1 123
Assembling the tow bar – Step 2 124
Check proper fitting 124
Removing the tow bar – Step 1 125
Removing the tow bar – Step 2 125
Mount accessories 126
The maximum trailer draw-bar load is 50 kg.
The draw bar load information on the type plate of the towing device is merely
a test value for the towing device. The vehicle-specific information is detailed
in the vehicle documents.
WARNING
■
Check that the tow bar is seated correctly and is secured in the mounting
recess before the start of every journey.
■
Do not use the ball head, if it is not correctly inserted into the mounting
recess and secured.
■
Do not use the towing equipment if it is damaged or incomplete.
■
Do not modify or adapt the towing device in any way.
■
Keep the mounting recess of the towing equipment clean at all times.
Such dirt prevents the ball head from being attached securely.
CAUTION
■
Take care with the ball bar - there is a risk of paint damage to the bumper.
■
When the tow bar is removed always place the cover onto the mounting re-
cess - there is a danger of soiling the mounting recess.
Note
■
Operation and maintenance of hitch » page 137.
■
Tow the vehicle by means of the detachable ball rod » page 171.
121
Hitch and trailer
Loading ...
Loading ...
Loading ...