Loading ...
Loading ...
Loading ...
Password/PIN code change
Read and observe and on page 47 first.
The factory set password for the Wi-Fi connection is the complete vehicle
identification number (upper case); the factory set PIN code for the Wi-Fi Direct
connection is the last 6 digits of the vehicle identification number.
After changing the password/PIN, the connection to SmartGate must be re-es-
tablished on the communication device to be connected using the new pass-
word or new PIN code.
If the password/PIN code is still set to the preset factory password/PIN code,
you are requested to change the password/PIN code after starting the ŠKODA
application. Without changing the password/PIN code, you are unable to use
the application.
Changing the password for the Wi-Fi connection
›
Open the SmartGate web interface.
›
In the “WPA / WPA2 key:” menu item, enter the new password (8 to 63 al-
phanumeric characters and special characters, upper and lower case).
›
Confirm the password change by tapping on the “Save” button.
›
Restart SmartGate by tapping on the “Reboot”
1)
button.
Changing the PIN code for the Wi-Fi Direct connection
›
Open the SmartGate web interface.
›
In the “WiFi Direct PIN:” menu item, enter the new PIN code (6 digits).
›
Confirm the PIN code change by tapping on the “Save” button.
›
Restart SmartGate by tapping on the “Reboot”
1)
button.
Note
If you have forgotten your password/PIN code for connecting to SmartGate,
SmartGate must be reset to the factory settings in a specialised workshop.
Unlocking and opening
Unlocking and locking
Introduction
This chapter contains information on the following subjects:
With the key on the lock cylinder unlock / lock 50
Unlocking/locking with the remote control key 50
Unlocking / locking - KESSY 51
Locking and unlocking the vehicle with the central locking button 51
Safe securing system 52
Individual settings 52
Opening/closing a door 53
Child safety lock 53
Malfunctions 53
Your car is equipped with a central locking system.
The central locking system allows you to lock and unlock all doors, the fuel fill-
er flap and boot lid at the same time. The functions of the central locking sys-
tem can be individually adjusted » page 52.
After unlocking, depending on vehicle equipment and setting the following is
valid for the central locking.
▶
The turn signal lights flash twice as confirmation that the vehicle has been
unlocked.
▶
The doors, the boot lid and the fuel filler flap are unlocked.
▶
The interior lamp illuminates.
▶
The SafeLock system is switched off.
▶
The indicator light in the driver door stops flashing.
▶
The anti-theft alarm system is deactivated.
After locking, depending on vehicle equipment and setting the following is
valid for the central locking.
▶
The turn signal lights flash once as confirmation that the vehicle has been
locked.
▶
The doors, the boot lid and the fuel filler flap are locked.
▶
The interior lamp goes out.
▶
The SafeLock system is switched on.
1)
If the “Reboot” interface is not displayed, you must manually restore the web browser display.
49
Unlocking and opening
Loading ...
Loading ...
Loading ...