Loading ...
Loading ...
Loading ...
Headrests - removing and installing
Fig. 61 Front head restraints: removal/installation
Fig. 62 Rear head restraints: removal/installation
Read and observe on page 69 first.
Front restraint
›
Pull the restraint out of the seat backrest as far as the stop.
›
Press locking button
A
in the direction of arrow
1,
and pull out the head re-
straint in the direction of arrow
2
» Fig. 61.
›
To re-insert the head restraint, push it far enough down into the seat back-
rest in the direction of arrow
3
until the locking button clicks into place.
Rear restraint
›
Pull the restraint out of the seat backrest as far as the stop.
›
Press locking button
B
in the direction of arrow
4
, while at the same time
using a flat-headed screwdriver with a max. width of 5 mm to press the lock-
ing button in opening
C
in the direction of arrow
5
» Fig. 62.
›
Remove the restraint in the direction of arrow
6
.
›
To re-insert the head restraint, push it far enough down into the seat back-
rest in the direction of arrow
7
until the locking button clicks into place.
WARNING
Please note the following points about the head restraint settings
» page 8, Correct and safe seated position.
CAUTION
Store the head restraints that were removed in such a way that they are not
damaged or soiled.
Note
In sports seats, the head restraints are integrated into the seat backrests and
cannot be removed.
Seat features
Introduction
This chapter contains information on the following subjects:
Front seat heating
70
Front armrest setting
71
Rear armrest setting
71
Seat backrests
72
Front seat heating
Fig. 63
Buttons for heating the front
seats
The seat backrests and seats can be heated electrically.
The heat output can be adjusted with the ignition on.
The heater is turned on after the engine has started.
70
Using the system
Loading ...
Loading ...
Loading ...