Loading ...
Loading ...
Loading ...
Fuel System
(cont’d)
Servicing Your Honda 61
1. Hang the fuel tank to the left side of the frame
(page 48).
2. Remove the fuel quick connect fitting cover
(1).
3. Check the fuel line (2) for cracks,
deterioration, damage or leakage. Replace the
fuel line, if necessary.
4. Install the fuel quick connect fitting cover.
5. Install the fuel tank (page 50).
Disconnection
1. Remove the fuel tank (page 48).
2. Check the fuel quick connect fitting (1) for
dirt, and clean if necessary.
3. Remove the bolt (2), clamp and setting rubber
(3).
4. Place a shop towel (4) over the fuel quick
connect fitting.
5. Unlock the slide retainer (5) of the quick
connect fitting by completely pulling it up.
Release the fuel quick connect fitting from the
fuel joint (6) while holding the connector
housing (7).
• Use a shop towel to absorb the remaining
fuel in the fuel feed hose.
• Be careful not to damage the hose or other
parts.
• Do not use tools.
• Dirt intruding into the connector housing
may cause slide retainer sticking.
Fuel Line Inspection
(1) fuel quick connect fitting cover
(2) fuel line
(1)
(2)
Fuel Line Replacement
(1) fuel quick connect fitting
(2) bolt
(3) clamp and setting rubber
(4) shop towel
(2)
(1) (3)
(4)
WARNING
Gasoline is highly flammable and
explosive. You can be burned or seriously
injured when handling fuel.
• Stop the engine and keep heat, sparks
and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
(5) slide retainer
(6) fuel joint
(7) connector housing
(5)
(6)
(7)
31MKE910.book 61 ページ ２０１９年２月１４日 木曜日 午後１時４１分
Loading ...
Loading ...
Loading ...