Loading ...
Loading ...
Loading ...
Suspension Adjustment Guidelines (Off-Road Use Only)
150 Adjustments
Suspension Adjustment Guidelines (Off-Road Use Only)
Follow the procedures described below to accurately adjust your motorcycle, using the methods described on pages 144 – 148. Remember to make all adjustments
in one-click or 1/12 turn increments. Test ride after each adjustment.
Front Suspension Adjustment
Adjustments for Type of Track
Hard-surfaced track Begin with the standard setting. If the suspension is too stiff/soft, adjust according to the chart below.
Sand track Adjust to a stiffer position.
Example: – Turn the compression damping adjuster to a stiffer position.
Mud track Adjust to a stiffer position because mud build-up increases your motorcycle’s weight.
Example: – Turn the compression damping adjuster to a stiffer setting.
Adjustments for Too Soft/Stiff Damping
Symptom Action
Soft
suspension
Initial travel too soft:
• Steering is too quick.
• Front end darts while cornering or riding in a straight line.
– Test stiffer compression damping adjustments in one-click increments.
– Test stiffer rebound damping in one-click increments.
Middle travel too soft:
• Front end dives when cornering.
If suspension isn’t stiff in initial travel:
– Test stiffer compression damping adjustments in one-click increments.
If initial travel becomes stiff because of the above adjustment:
– Reduce the rebound damping in one-click increments.
– Test softer compression damping adjustments in one-click increments.
Final travel too soft:
• Bottoms on landings.
• Bottoms on large bumps, especially downhill bumps.
If initial and middle travel aren’t stiff:
– Test stiffer compression damping adjustments in one-click increments.
Entire travel too soft:
• Front end shakes.
• Fork bottoms over any type of terrain.
– Test stiffer compression damping adjustments in one-click increments.
– Increase rebound damping in one-click increments.
31MKE910.book 150 ページ ２０１９年２月１４日 木曜日 午後１時４１分
Loading ...
Loading ...
Loading ...