Loading ...
Loading ...
Loading ...
Piston/Piston Rings/Piston Pin
96 Servicing Your Honda
Piston/Piston Rings/Piston Pin
Refer to Important Safety Precautions on page 33.
1. Clean the area above the engine before
disassembly to prevent dirt falling into the
engine.
2. Drain the radiator coolant after cooling the
motorcycle (page 159).
3. Remove the seat and fuel tank (pages 46, 48).
4. Remove the muffler (page 133).
5. Remove the exhaust pipe (page 134).
6. Remove the subframe (page 52).
7. Remove the spark plug (page 86).
8. Remove the cylinder head cover (page 87).
9. Set the piston at TDC on the compression
stroke (page 88).
10. Remove the camshaft holder, camshaft and
shims (page 89).
11. Disconnect the ignition coil A connector (1)
and B connector (2).
Remove the ignition coil (3) by removing the
ignition coil bolts (4).
12. Remove the right radiator lower mounting bolt
(5) and washer (6).
13. Loosen the insulator band screw (7) and pull
the throttle body (8) out from the insulator (9).
Disconnect the vacuum tube (10) from the
insulator.
Do not hang the throttle body and support it with a
suitable strap.
14. Remove the thermostat case mounting bolts
(11).
Remove the thermostat case assembly (12)
from the cylinder head (13).
Cylinder Head Removal
(1) ignition coil A connector (3) ignition coil
(2) ignition coil B connector (4) ignition coil bolts
(4)
(3)
(2)
(1)
(5) right radiator lower mounting bolt
(6) washer
(7) insulator band screw
(8) throttle body
(9) insulator
(10) vacuum tube
(6) (5)
(7)
(8)
(10)
(9)
(11) bolts
(12) thermostat case
(13) cylinder head
(12)
(13)
(11)
31MKE910.book 96 ページ ２０１９年２月１４日 木曜日 午後１時４１分
Loading ...
Loading ...
Loading ...