Loading ...
Loading ...
Loading ...
Servicing Your Honda 51
Fuel Tank
7. Install the harness band clip (7) to the stopper
cable guide (8).
Connect the fuel pump connector (9).
8. Install the fuel tank (4) into the frame. Install
the washers (10) and fuel tank bolts (11), then
tighten the bolts to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
9. Connect the breather tube (12) to the tube joint
(13). Install the breather tube to the tube guide
(14) onto the top shelter (15).
10. Slide the shroud (16) toward the down so that
the shroud tab (17) and the slot (18) on the side
cover (19) is aligned.
11. Install the shroud C bolt (20), B bolt (21) and
shroud A bolt (22).
Tighten the shroud A and B bolts to the
specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
Tighten the shroud C bolt to the specified
torque:
3.8 lbf·ft (5.2 N·m, 0.5 kgf·m)
The right and left shrounds can be installed in
the same manner.
12. Install the seat (page 46).
(7) harness band clip (9) fuel pump connector
(8) stopper cable guide
(4) fuel tank (11) fuel tank bolts
(10) washers
(7)(9)
(8)
(4)
(11)
(10)
(11)
(10)
(12) breather tube (14) tube guide
(13) tube joint (15) top shelter
(13)
(12)
(12)
(15)
(14)
(16) shroud (20) shroud C bolt
(17) tab (21) shroud B bolt
(18) slot (22) shroud A bolt
(19) side cover
(16)
(20)
(21)
(22)
(17)
(19)
(18)
31MKE910.book 51 ページ ２０１９年２月１４日 木曜日 午後１時４１分
Loading ...
Loading ...
Loading ...