Loading ...
Loading ...
Loading ...
(179,1)
北米Model "A1380BE-A" EDITED: 2019/ 7/ 10
5) Telltale screen (Refer to “Telltale screen”
F3-36.)
6) Select lever/gear position indicator (Re-
fer to “Select lever/gear position indicator
(CVT models)” F3-31.)
7) SI-DRIVE indicator light (if equipped)
(Refer to “SI-DRIVE” F7-31.)
8) Odometer (Refer to “Odometer” F3-9.)/
Double trip meter (Refer to “Double trip
meter” F3-9.)
9) Fuel gauge (Refer to “Fuel gauge” F3-
10.)
A: · Models without the EyeSight system
· Models with the EyeSight system:
when the EyeSight system is deacti-
vated.
B: Models with the EyeSight system:
when the EyeSight system is activated.
*: For models with the EyeSight system,
the cruise control information display
will not be shown when the EyeSight
system is deactivated.
& Basic operation
S03BN01
Control switch
1)
(Up)
2)
/SET (enter)
3)
(Down)
By operating “ ” or “ ” of the control
switch, the screens and selection items
can be switched. When the “
/SET”
switch is pulled toward you, the item can
be selected and set.
If there are some useful messages, such
as vehicle information, warning informa-
tion, etc., they will interrupt the current
screen, and appear on the display accom-
panied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.
The warning screen will return to the
original screen after a few seconds. While
the “
” information reminder is shown on
the display, it may be possible to display
the warning screen again. To recall the
message marked with “
” on the display,
pull the “
/SET” switch on the steering
wheel toward you.
NOTE
When the multi-function display (color
LCD) is set to the setting screen, the
combination meter display (color LCD)
cannot be controlled pulling on the
“
”, “ ” and “ /SET” on the control
switch.
& Welcome screen (opening
animation) and Good-bye
screen (ending animation)
S03BN08
When the driver’s door is opened and
closed after unlocking the door, the wel-
come screen (opening animation) will
appear on the combination meter display
(color LCD) for approximately 20 seconds.
When the ignition switch is turned to the
“LOCK”/“OFF” position, the combination
meter display (color LCD) gradually turns
off with showing the Good-bye screen
(ending animation).
– CONTINUED –
Instruments and controls/Combination meter display (color LCD)
3-35
3
Loading ...
Loading ...
Loading ...