Loading ...
Loading ...
Loading ...
(118,1)
北米Model "A1380BE-A" EDITED: 2019/ 7/ 10
passenger’s door handle.
– Lock the doors.
– Open a door and then close it.
. Case 2: When the access key fob has
been left in the operating range for 10
minutes or longer while all doors are
locked.
Operate one of the following items to
recover the keyless access function:
– Unlock the doors by gripping the
door handle.
– Unlock the doors by pressing the
rear gate opener button.
– Lock the doors by touching the door
lock sensor.
– Lock or unlock the doors by using
the remote keyless entry system.
– Lock or unlock the doors by using
the power door locking switch.
– Open either of the front doors.
& Power saving function of ac-
cess key fob
S02AP22
This function stops the access key fob
from receiving signals and helps minimize
the battery consumption of the access key
fob.
1. Press the “
” button twice while hold-
ing the “
” button.
1) LED indicator
2. Confirm that the LED indicator blinks 4
times to notify that the setting is complete.
When the access key fob is in the power
save mode, the keyless access function
and push-button start system will not be
available.
To cancel the power save mode, press one
of the buttons on the access key fob.
& Disabling keyless access
function
S02AP07
WARNING
If you wear an implanted pacemaker
or an implanted defibrillator, per-
form the procedure described in
“By operating the driver’s door” F2-
15 to disable the keyless access
function. If you perform the proce-
dure described in “By operating the
access key fob” F2-14, the opera-
tion of an implanted pacemaker or
implanted defibrillator may be af-
fected by the radio waves from the
transmitter antenna.
When the vehicle is not going to be used
for a long time, or when you choose not to
use the keyless access function, the key-
less access function can be disabled.
NOTE
. The locking and unlocking function
by the remote keyless entry system is
not disabled.
. To start the engine while the func-
tions are disabled, perform the proce-
dure described in “Starting engine”
F9-20.
! Disabling functions
S02AP0701
! By operating the access key fob
S02AP070102
If you have registered a PIN code for PIN
Code Access, you can disable the keyless
access function by operating the access
key fob. For details about registering a PIN
code, refer to “Preparation for registering a
PIN code” F2-12.
Keys and doors/Keyless access with push-button start system
2-14
Loading ...
Loading ...
Loading ...