Loading ...
Loading ...
Loading ...
(130,1)
北米Model "A1380BE-A" EDITED: 2019/ 7/ 10
& Automatic door locking/un-
locking (if equipped)
S02AC08
All doors are automatically locked or
unlocked under the following conditions.
. For automatic door locking
– When the vehicle speed reaches 12
mph (20 km/h) or higher (factory
default setting).
– When the select lever is shifted into
a position other than the “P” position
(CVT models).
. For automatic door unlocking
– When the driver’s door is open
(factory default setting).
– When the ignition switch is turned to
OFF.
– When the select lever is shifted into
the “P” position (CVT models).
NOTE
. The user can change the automatic
door lock and unlock setting with the
combination meter. Refer to “Menu
screens” F3-39.
. When locking the door by operating
power door locking switches, auto-
matic door locking will not operate.
. When unlocking the door by operat-
ing power door locking switches, auto-
matic door unlocking will not operate.
. When getting out of the vehicle from
a rear door, make sure to unlock all the
doors by pushing the unlock side of the
power door locking switch. If a rear
door is unlocked from the inside door
lever then the door is opened and
closed, the Key lock-in prevention
function will be triggered. All doors will
be unlocked, the Key lock-in prevention
warning indicator “
” will appear and
the warning chime will also sound.
& Key lock-in prevention func-
tion
S02AC06
Under the following conditions, all the
doors will not lock when the power door
locking switch is pushed with the front door
open.
. The key is still in the ignition switch
(models without “keyless access with
push-button start system”).
. The ignition switch is in the “ACC” or
“ON” position (models with “keyless ac-
cess with push-button start system”).
. With the driver’s door open, the doors
are automatically kept unlocked even if the
power door locking switch is pressed to the
lock position.
NOTE
. When leaving the vehicle, make sure
you are holding the key before locking
the doors.
. The factory setting (default setting)
for this function is set as “operational”.
This function’s operational/non-opera-
tional setting can be changed by a
SUBARU dealer. Contact a SUBARU
dealer for details.
! Non-operation of key lock-in pre-
vention function
S02AC0602
When the system is set so that it does not
operate, the doors are locked by the
following operation.
. If the lock lever is turned to the front
(“LOCK”) position with the driver’s door
open and the driver’s door is then closed
with the lock lever in that position, the
driver’s door is locked.
. If the spare key is used to lock the
driver’s door from the outside of the
vehicle, the door is locked.
& Battery drainage prevention
function
S02AC03
If a door or the rear gate (5-door models) is
not completely closed, the interior lights
will remain illuminated as a result. How-
ever, several lights are automatically
turned off by the battery drainage preven-
tion function to prevent the battery from
discharging. The following interior lights
are affected by this function.
Keys and doors/Door locks
2-26
Loading ...
Loading ...
Loading ...