Loading ...
Loading ...
Loading ...
Professional Mode: On
Enter the Professional
Home Menu.
Select TV settings > General settings > Switch off
timer and set the slider bar to Off.
Audio Out settings
Audio Out delay
With a Home Theatre System (HTS) connected to the
TV, the picture on TV and the sound from the HTS
should be synchronised.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio
to video sync is done automatically synchronised and
always correct.
Audio sync delay
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. On the HTS, increase the delay value
until there is a match between picture and sound. A
delay value of 180ms may be required. Read the user
manual of the HTS. With a delay value set up on the
HTS, you need to switch off Audio out delay on the
TV.
To switch off the Audio Out delay . . .
1 - Professional Mode: Off
Press
and
select Setup and press OK.
Professional Mode: On
Enter the Professional
Home Menu.
2 - Select TV settings > Sound > Advanced > Audio
out delay.
3 - Select Off and press OK.
4 - Press
, repeatedly if necessary, to close the
menu.
Audio Out offset
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound. You
can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the TV picture. You can set the value in
steps of 5ms. Maximum setting is -60ms. The Audio
Out delay setting should be switched on.
To synchronise the sound on the TV . . .
1 - Professional Mode: Off
Press
and
select Setup and press OK.
Professional Mode: On
Enter the Professional
Home Menu.
2 - Select TV
settings > Sound > Advanced > Audio out offset.
3 - Use the slider bar to set the sound offset and
press OK.
4 - Press
, repeatedly if necessary, to close the
menu.
Audio Out format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like
Dolby Digital, DTS® or similar, set the Audio out
format to Multichannel. With Multichannel, the TV can
send the compressed multichannel sound signal from
a TV channel or connected player to the Home
Theatre System. If you have a Home Theatre System
without multichannel sound processing, select Stereo.
To set the Audio out format . . .
1 - Professional Mode: Off
Press
and
select Setup and press OK.
Professional Mode: On
Enter the Professional
Home Menu.
2 - Select TV
settings > Sound > Advanced > Audio out format.
3 - Select Multichannel or Stereo.
4 - Press
, repeatedly if necessary, to close the
menu.
Audio Out levelling
Use the Audio Out levelling setting to level the
volume (loudness) of the TV and the Home Theatre
System when you switch over from one to another.
Volume differences can be caused by differences in
sound processing.
To level the difference in volume . . .
1 - Professional Mode: Off
Press
and
select Setup and press OK.
Professional Mode: On
Enter the Professional
Home Menu.
2 - Select TV
settings > Sound > Advanced > Audio out
levelling.
3 - If the volume difference is large, select More. If
the volume difference is small, select Less.
4 - Press
, repeatedly if necessary, to close the
menu.
Audio Out levelling affects both the Audio Out -
Optical and HDMI ARC sound signals.
9
Loading ...
Loading ...
Loading ...