40HFL5010L/12 User Manual

Loading ...

Use the Common Interface slot on the TV to insert the

CAM card.

With the front of the card facing towards you, gently

insert the CAM as far as it will go.

Leave the card in the slot permanently.

It may take a few minutes before the CAM is

activated. Removing the CAM will deactivate the

broadcast service on TV.

If a CAM is inserted and subscription fees are paid,

(connection methods can differ), you can watch the

TV broadcast. The inserted CAM is exclusively for

your TV.

CAM settings

To set passwords or PIN codes for the CAM TV

broadcast, press



and select Setup and press OK.

Select Channel settings > Common Interface.

Select the CAM TV broadcaster and press OK.

2.4

Set-top box - STB

Use 2 antenna cables to connect the antenna to the

Set-top box (a digital receiver) and the TV.

Next to the antenna connections, add an HDMI cable

to connect the Set-top box to the TV.

Alternatively, you can use a SCART cable if the Set-

top box has no HDMI connection.

Switch off timer

Switch off this automatic timer, if you only use the

remote control of the Set-top box. Do this to prevent

the TV from switching off automatically after a 4 hour

period without a key press on the remote control of

the TV.

To switch off the Switch off timer:

Professional Mode: Off



Press



and

select Setup and press OK.

Professional Mode: On



Enter the Professional

Home Menu.

Select TV settings > General settings > Switch off

timer and set the slider bar to Off.

2.5

Home Theatre System - HTS

Connect HTS