Loading ...
Loading ...
Loading ...
39
TROUBLESHOOTING
A warning message will be given if a wheel does not contact the floor surface for any reason.
Move the Robot Cleaner on to a flat floor.
Turn off the main power switch on the rear side of the Robot Cleaner. Then lay a soft cloth on the
floor, turn over the Robot Cleaner, and put it on the cloth.
Remove foreign material after observing the wheels.
※
Please make sure to remove the dust bin before turning over the main body.
Otherwise, the dust in the dust bin may fall out.
A warning message will be given if the Robot Cleaner cannot go on cleaning due to any unfavourable
condition.
After removing it from the obstacle, place the Robot Cleaner back onto the flat floor.
"The wheels are not touching the floor. Please move Robot Cleaner
onto flat floor."
"Please remove foreign material on the left/right wheel."
"Robot Cleaner cannot continue cleaning. Please check the area
around Robot Cleaner."
Loading ...
Loading ...
Loading ...