Loading ...
Loading ...
Loading ...
33
CLEANING THE DUST BIN
not covered by the warranty.
If the filters are not installed and the filter cover assembled before cleaning is started, an
error message will sound.
cleaning the dust bin so that it closes easily and accurately.
Tip
pressing the PUSH button on the Robot
Cleaner.
2. Grab the handle of the dust bin and pull it
upward.
the rear of the dust bin to separate the filter
and the sponge.
※
Note that separating the filter may result in
dust dropping.
※
filter.
separation button on the dust bin.
brush or under running water.
6. After cleaning with water, completely dry the
dust bin in a well-ventilated area out of the
direct sunlight.
7. Reassemble the dust bin, putting the sponge
and particulate filter back in and closing the lid.
※
8. Put the dust bin into the Robot Cleaner and
close the dust bin compartment cover.
If the dust bin is full, suction power can be reduced. Clean the dust bin before or after each cleaning
session. Clean the dust bin using the following sequence:
Loading ...
Loading ...
Loading ...