Loading ...
Loading ...
Loading ...
31
SMART DIAGNOSIS™
Diagnosis is complete. If it is accidentally interrupted, turn the main power switch OFF
then ON again to resume the diagnosis.
the problem and try again.
- Robot Cleaner is detached from the home station.
- Battery level is insufficient
- No Dust Bin Filter is fitted.
- Mop Plate is attached
Tip
switch of the Robot Cleaner and the home station are
turned on, and the unit is docked on the home station.
※
Smart Diagnosis is only possible when the Robot
Cleaner is attached to the home station.
2. Press the Diagnosis button on the remote, then the
process will start with a voice message which says
"Robot Cleaner Smart Diagnosis will be started. Please
station."
※
If the Mop Plate is attached, the process will not be
activated.
finished, Robot Cleaner will return back to
the Home Station and inform you of the
result through a voice message. After the
voice message, pressing the Home button on
the remote or main unit will allow the voice
message to be repeated. To terminate the
diagnosing process, press the
button on the
remote or main unit.
※
After the Smart Diagnosis voice message,
the Robot Cleaner will start recharging after
1 minute.
※
If an error is detected with any of the
sensors while in Smart Diagnosis, a voice
message will announce, and the unit will not
return to the home station.
Robot Cleaner uses the Smart Diagnosis feature to run a self-diagnosis.
center.
※
During Smart Diagnosis, the Robot Cleaner moves about within a 1
1
/5 ft. (50 cm) radius. So,
make sure no objects are in the way within a 3
1
/4 ft. (1 m) radius around the home station, before
starting Smart Diagnosis.
Loading ...
Loading ...
Loading ...