Loading ...
Loading ...
Loading ...
20
CHARGING THE BATTERY
The Robot Cleaner returns to the home station at the end of a
cleaning cycle or when its battery is running low.
※
battery is too low, the Robot Cleaner automatically goes into
standby mode.
※
The power switch has to be in the ON position in order for the
Robot Cleaner to charge at the home station. If the switch is
OFF, an error message sounds.
※
After the battery is fully charged, the Robot Cleaner resumes
※
If the Robot Cleaner is unable to dock to the home station on its first attempt, it will try again until it
docks successfully.
※
When the Robot Cleaner has completed cleaning the area, it will return to the home station even if
the battery level is not low.
Method 1. Attach the Robot Cleaner to the home
station by aligning it to the front side of
the home station. A melody sounds along
with a message to start charging.
※
The main power switch must be in the
ON position in order for the Robot
Cleaner to charge. An error message is
heard if the power switch is in the OFF
position while mounted to the home
station.
Method 2.
Robot Cleaner or the remote to return
the Robot Cleaner to the home station to
charge.
Automatic charging
Manual charging
Take the following precautions when using the home station:
If foreign material is caught on the charging terminal, charging may not be activated. Wipe
Tip
Manually charge the Robot Cleaner before using it for the first time.
※
If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually
charged by pressing the Home button, it may take slightly longer to find the home station.
※
in.cm) of the front of the charging terminal while the power is
turned on from Standby, it will automatically be returned to the home station and charging will begin.
Loading ...
Loading ...
Loading ...