Loading ...
Loading ...
Loading ...
17
Timers
Getting Started
Setting clock at power up
You will be prompted to enter the time of day in the
event of a power failure or when you rst provide
electric power to your appliance.
• Whenyourapplianceisrstpoweredup,12:00
willashinthedisplay.
• Enter the time of day using the numeric key pads
and press START to set.
If an invalid time of day is entered, the control will
triple beep. Re-enter a valid time of day and press
START. If CANCEL is pressed your clock will start
with the time set for 12:00.
Select the user pref key to modify the time of day
during other situations such as day light savings.
See example below to set the timer for 5 minutes:
NOTE
The timer(s) will not affect the cooking process.
The two timers provided with the oven control
serve as extra reminders in the kitchen. When a
timer reaches less than 1 minute the display will
start to count down in seconds. When the time runs
out the active timer will beep, "0:00"willash.
The following time settings apply to the timers:
• Min. time: 1 minute
• Max. time: 11 hours 59 minutes
To cancel after setting the timer, press the TIMER
key again.
Example
Step Press
1. Press TIMER
2. Enter 5 minutes
3. Press TIMER
Changing settings
Software controls the micro and lower ovens
so that both may be set to operate at the same
time with unique settings. It is very important to
understand that before setting or modifying either
oven,youmustrstselect which oven you desire
to set or modify.
The display will provide which oven is currently
selected for setting/changes by displaying a small
red triangle indicator next to the micro or lower
oven text.
If the micro oven text symbol displays the red
triangle indicator but you wish to set or change
the settings for the lower oven, press once to
change the oven selection -Fig.1-. Then make the
setting/changes. You may toggle between either
oven and make setting changes at any time except
when you are currently setting a cooking mode.
Fig.1
Loading ...
Loading ...
Loading ...