Loading ...
Loading ...
Loading ...
55
32L220U/43L420U/49L420U/50L420U 32" 720p / 43" / 49" / 50" 1080p 60Hz LED TV
www.tv.toshiba.com
Playing TV audio only
You can turn off the picture on your TV and listen to
the program audio only.
1 Press MENU, press
or
to highlight Options,
then press ENTER.
2 Highlight Power Management, then press
ENTER.
3 Highlight Audio Only, then press ENTER.
4 Highlight On or Off, then press ENTER.
5 Press EXIT to close the menu.
Changing channel settings
This section covers:
• Automatically scanning for channels
• Manually adding channels to the channel list
•Hiding channels
• Setting up the Favorites list
• Tuning to a favorite channel or input
• Deleting a favorite channel or input
Automatically scanning for channels
When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press CH
or CH
, your TV goes to the next or previous channel
in the channel list. The channel scan may take several
minutes.
1 Make sure that you have set up the
ANT / CABLE IN jack before programming
channels. See Setting up the ANT / CABLE IN jack
on page 38.
2 Press MENU, press
or
to highlight
Installation, then press ENTER.
Notes
• The picture turns off in about five
seconds.
• Press any button to turn on the picture
for about five seconds.
• To exit audio only mode, repeat this
task and select Off.
Note
When you scan for channels, your TV
erases any channels already stored in the
channel list.
If a channel is not stored in the channel
list, you can:
• Use the number button on the remote
control to enter the channel number.
• Manually add the channel to the
channel list. See Manually adding
channels to the channel list on page 56.
Toshiba 32L22_43L42_49L42_50L420U_16-1130_MAN_V4_EN.book Page 55 Monday, January 23, 2017 9:10 PM
Loading ...
Loading ...
Loading ...