Loading ...
Loading ...
Loading ...
347
6-4. Other interior features
6
Interior features
MIRAI_OM_USA_OM62054U(18MY)_O
M62048U(19MY)
■
Reprogramming a single HomeLink
button
When the following procedure is performed, buttons which already
have devices registered to them can be overwritten:
With one hand, press and hold the desired HomeLink
button.
When the HomeLink
indicator starts flashing (orange), continue
to hold the HomeLink
button and perform “Programming
HomeLink
” (it takes 20 seconds for the HomeLink
indicator
to start flashing).
Press the appropriate HomeLink
button. The HomeLink
indicator
light should turn on.
The status of the opening and
closing of a garage door is shown
by the indicators.
Opening
Closing
This function is only available if the
garage door opener motor used is
a compatible device. (To check
device compatibility, refer to
www.HomeLink.com.)
The indicators can operate within approximately 820 ft. (250 m) of the
garage door. However, if there are obstructions between the garage
door and the vehicle, such as houses and trees, feedback signals
from the garage door may not be received.
To recall the previous door operation status, press and release either
HomeLink
buttons and or and simultane-
ously. The last recorded status will be displayed for 3 seconds.
Operating HomeLink
Garage door operation indicators
1
2
1
Color Status
Orange (flashing) Currently opening/closing
Green Opening/closing has completed
Red (flashing)
Feedback signals cannot be received
Loading ...
Loading ...
Loading ...