Loading ...
Loading ...
Loading ...
187
5-2. Driving procedures
5
Driving
MIRAI_OM_USA_OM62054U(18MY)_O
M62048U(19MY)
Stop the vehicle completely.
Set the parking brake. (P. 200)
Press the P position switch.
(P. 194)
Check that the shift position indica-
tor shows P. (P. 193)
Press the power switch.
The meter display will turn off, indicating the fuel cell system has stopped.
(The shift position indicator is displayed for several seconds)
The H
2
O indicator will illuminate, indicating exhaust water is being purged.
Release the brake pedal and check that the meter display is off.
When the fuel cell system is stopped, water is automatically purged
from the tailpipe. To minimize water accumulation at parking garages,
etc., purge can be done manually before parking.
While the “READY” indicator is
on, press the H
2
O switch.
The H
2
O indicator on the meter
turns on.
Press the switch again to stop the
purge.
Remember that water is being gen-
erated as long as the fuel cell sys-
tem is operating. So a small
amount of water will be generated
after manual purging and before
parking.
Stopping the fuel cell system
1
2
3
Water release (H
2
O switch)
4
5
Loading ...
Loading ...
Loading ...