User Manual - Page 35

For 2018 STONIC.

Loading ...
Loading ...
Loading ...
(Continued)
Although the front passenger seat
is not occupied, the seat belt
warning light will blink or illumi‐
nate for 6 seconds.
The front passenger's seat belt
warning may operate when lug‐
gage is placed on the front pas‐
senger seat.
Rear passenger’s seat belt warning
(if equipped)
OQL035070
If the ignition switch is turned ON (en‐
gine is not running) when the rear pas‐
senger's lap/shoulder belt is not fas‐
tened, the corresponding seat belt
warning light will illuminate until the
belt is fastened.
And then, the rear corresponding seat
belt warning light will illuminate for ap‐
proximately 35 seconds, if any of fol‐
lowing occurs;
-
You start the engine when the rear
belt is not fastened.
-
You drive over 9km/h when the rear
belt is not fastened.
-
The rear belt is disconnected when
driving under 20km/h.
If the rear seat belt is fastened, the
warning light will turn off immediately.
If the rear seat belt is disconnected
when you drive over the 20km/h, the
corresponding seat belt warning light
will blink and warning chime will sound
for 35 seconds.
But, if the rear passenger's lap/shoul‐
der belt is/are connected and discon‐
nected twice within 9 seconds after the
belt is fastened, the corresponding seat
belt warning light will not operate.
3-15
3
Safety features of your vehicle
Loading ...
Loading ...
Loading ...