Loading ...
Loading ...
Loading ...
Auto up/down window (if equipped)
Pressing or pulling up the power win‐
dow switch momentarily to the second
detent position (6) completely lowers
or lifts the window even when the
switch is released. To stop the window
at the desired position while the win‐
dow is in operation, pull up or press and
release the switch to the opposite di‐
rection of the movement.
If the power window is not operated
correctly, the automatic power window
system must be reset as follows:
1. Turn the ignition switch to the ON
position.
2. Close the window and continue
pulling up on the driver’s power
window switch for at least 1 sec‐
ond after the window is completely
closed.
Automatic reversal
If the upward movement of the window
is blocked by an object or part of the
body, the window will detect the resist‐
ance and will stop upward movement.
The window will then lower approxi‐
mately 30 cm (11.8 in.) to allow the ob‐
ject to be cleared.
If the window detects the resistance
while the power window switch is
pulled up continuously, the window will
stop upward movement then lower ap‐
proximately 2.5 cm (1 in.).
And if the power window switch is
pulled up continuously again within 5
seconds after the window is lowered by
the automatic window reversal feature,
the automatic window reversal will not
operate.
NOTICE
The automatic reverse feature for
the driver’s window is only active
when the auto up feature is used
by fully pulling up the switch. The
automatic reverse feature will not
operate if the window is raised using
the halfway position on the power
window switch.
WARNING
Always check for obstructions be‐
fore raising any window to avoid in‐
(Continued)
4-25
4
Features of your vehicle
Loading ...
Loading ...
Loading ...