Loading ...
Loading ...
Loading ...
(Continued)
Please note the expiry date on the
sealant bottle.
Using the Tire Mobility Kit
1. Detach the speed restriction label
(1) from the sealant bottle (2), and
place it in a highly visible place in‐
side the vehicle such as on the
steering wheel to remind the driver
not to drive too fast.
2. Filling the sealant Strictly follow
the specified sequence, otherwise
the sealant may escape under high
pressure.
3. Shake the sealant bottle.
4. Connect the filling hose (3) onto the
connector of the sealant bottle (A).
5. Ensure that the button (9) on the
compressor is not pressed.
6. Unscrew the valve cap from the
valve of the defective wheel and
screw the filling hose (3) of the
sealant bottle onto the valve.
7. Insert the sealant bottle into the
housing of the compressor so that
the bottle is upright (B).
8. Ensure that the compressor is
switched off, position 0.
9. Connect between compressor and
the vehicle power outlet using the
cable and connectors.
NOTICE
Only use the front passenger side
power outlet.
10. With the ignition switched on or en‐
gine start/stop button position on:
Switch on the compressor and let it
run for approximately 3 minutes to
fill the sealant. The inflation pres‐
sure of the tire after filling is unim‐
portant.
11. Switch off the compressor.
7-23
7
What to do in an emergency
Loading ...
Loading ...
Loading ...