Loading ...
Loading ...
Loading ...
W-60
Glow indicator light
3. Press the engine start/stop button
while depressing the brake pedal.
4. Continue depressing the brake ped‐
al until the illuminated glow indica‐
tor goes off. (approximately 5 sec‐
onds)
5. The engine starts running when
the glow indicator goes off.
NOTICE
If the engine start/stop button is
pressed once more while the engine
is pre-heating, the engine may start.
Starting and stopping the engine for
turbocharger intercooler
1. Do not race or accelerate the en‐
gine immediately after starting.
If the engine is cold, idle for several
seconds before sufficient lubrica‐
tion is ensured in the turbocharger
unit.
2. After high speed or extended driv‐
ing, requiring a heavy engine load,
idle the engine about 1 minute be‐
fore turning it off.
This idle time will allow the turbo‐
charger to cool prior to shutting off
the engine.
CAUTION
Do not turn off the engine immedi‐
ately after it has been subjected to a
heavy load. Doing so may cause se‐
vere damage to the engine or turbo‐
charger unit.
• Even if the smart key is in the vehicle,
if it is far away from you, the engine
may not start.
• When the ENGINE START/STOP but‐
ton is in the ACC position or above, if
any door is opened, the system
checks for the smart key. If the
smart key is not in the vehicle, the
or
KEY
OUT
indicator will blink or
the warning "Key is not in vehicle" will
illuminate on the LCD display. And if
all doors are closed, the chime will
sound for 5 seconds. The indicator or
warning will turn off while the vehicle
is moving. Always have the smart key
with you.
WARNING
The engine will start, only when the
smart key is in the vehicle.
Never allow children or any person
who is unfamiliar with the vehicle
touch the ENGINE START/STOP but‐
ton or related parts.
CAUTION
If the engine stalls while the vehicle
is in motion, do not attempt to move
the shift lever to the P (Park) posi‐
(Continued)
Driving your vehicle
6-14
Loading ...
Loading ...
Loading ...