Loading ...
Loading ...
Loading ...
TIRE PRESSURE MONITORING SYSTEM (TPMS) (IF EQUIPPED)
OYB067019B
OYB067018
Low tire pressure telltale (1) / TPMS
SET switch (2)
System Overview
The tire pressure monitoring system
(TPMS) senses change in radius of the
tire. If the tire pressure decreases be‐
low the recommended pressure, the
system warning light will be illumina‐
ted.
For the system to function properly, it
is the driver’s responsibility to set the
system by following accurate proce‐
dure and set current tire pressure.
The warning light will illuminate on the
cluster when one or more of your tires
is under-inflated after the TPMS is set.
The warning light will also illuminate to
warn the driver of system malfunction.
Please refer to the above image (1) for
further information.
TPMS Setting
The driver can set the TPMS by follow‐
ing procedures below:
1. Inflate all tires to the recommen‐
ded pressure.
2. Start the engine, make sure the ve‐
hicle is not moving, and press the
TPMS switch (2) left side on the
driver’s seat for over 3 seconds.
3. Check if the ( ) warning indicator
blinks for 4 seconds.
4. Check if following message appears
on the cluster (if equipped).
❈ If the warning light does not blink
or the message does not pop up,
perform the process again from 2.
For recommended tire pressure of this
vehicle, refer to Tire and wheels on
page 9-06or the tire pressure label on
the driver’s door.
For proper function of the TPMS, the
driver must set the system in following
situations.
❈ Situation requiring TPMS setting
• If the tire or wheel is repaired or re‐
placed
• If the tire or wheel is repositioned.
• If the tire pressure is adjusted.
What to do in an emergency
7-08
Loading ...
Loading ...
Loading ...