Loading ...
Loading ...
Loading ...
(Continued)
• Use the holder only when there is
no passengers in the rear seat or
when you need to fold the rear
seat.
To fold down the rear seatback:
1. When folding the seat back, insert
the rear seat belt buckle in the
pocket between the rear seatback
and cushion then make sure both
seatbelts do not interfere with
stowed luggage and cargo. Then,
insert the seat belt into the two
holes located on both sides.
2. Set the front seatback to the up‐
right position and if necessary, slide
the front seat forward.
3. Lower the rear headrests to lowest
position.
4. Pull the lock release lever and fold
the rear seatback forward and
down firmly.
To unfold the rear seat
1. To use the rear seat, lift and pull
the seatback backward. Pull the
seatback firmly until it clicks into
place. Make sure the seatback is
locked in place. When you return
the seatback to its upright position,
always be sure it has locked into
position by pushing on the top of
the seatback.
If you can not see the red line at
the bottom of folding lever, it
means the seatback is locked com‐
pletely.
2. Return the rear seat belt to the
proper position.
3. When the seatback is completely
installed, check the seatback fold‐
ing lever again.
WARNING
n
Uprighting seat
When you return the seatback to its
upright position, hold the seatback
and return it slowly. If the seatback
is returned without holding it, the
back of the seat could spring for‐
(Continued)
3-11
3
Safety features of your vehicle
Loading ...
Loading ...
Loading ...