Loading ...
Loading ...
Loading ...
Installation
This appliance is always supplied with a set of
a
d
j
u
s
t
able feet and, depending on the model, with a
spl
ash guard.
The appliance may also be used without the splash
guar
d.
Fitting the adjustable feet
Beforehand:
•
Remove all parts that are not permanently fixed,
espec
ially the pan supports and burners.
•
Remove the accessories from the oven.
Pro
ce
e
d as
follows:
•
Tilt the appliance by raising one side slightly from
t
h
e f
l
oor.
•
With the plates in position, screw the adjustable
fee
t into the mounting holes on the underneath of
the
appliance.
•
Repeat the process on the other side.
You
can make the final adjustments to the feet in
order
to level the appliance once the gas and
elec
tricity supply have been connected.
If
it is necessary to pull the appliance, screw the
adj
ustable feet in fully. Make the final settings only
whe
n the other installation tasks have been
comp
leted.
8
Positioning and levelling
Positioning the appliance
When installing the appliance, make sure that there
is enough space in the final installation location to
pull
the appliance forwards for cleaning and
maintenance
work.
The ground underneath must be hard and stable.
The wall immediately behind the appliance must be
made from non-flammable material, e.g. tiles.
If you need to pull the appliance in order to position
it,
make sure that the adjustable feet are screwed
in
fully.
Levelling the appliance
Level the appliance once all other work has been
completed.
To do this, turn the adjustable feet.
9
Loading ...
Loading ...
Loading ...